Pressure Switch Specially Designed for Quick Die Change System (Die Clamps)
This pressure switch is especially designed for Quick Die Change System Die Clamps to fit into the Automatic Clamp Systems, Quick Die and Mold Change Systems for Plastic Injection Molding Machines and CNC Lathes where safety is highly concerned to ensure the proper clamp pressure to hold the Dies and Molds during operations.  When the clamp pressure drops below a preset safe pressure to hold the Dies and Molds, this special pressure switch will alarm or light a LED to keep the operators noticed.

Features:
1. Compact, Robust Design.
2. Easy to Install.
3. Custom Design Accpeted.
4) Cost Effective.
5) Value-Added Features.
6) Increase Operation Safety.

General Specs:
Dial Size: 1 1/2", 2", 2 1/2", and 4".
Movement: Germany-Imported SS430 Material.
Internals & Socket: Brass Material.
Accuracy: ±2% on 1 1/2" and 2", ±1.5% on 2 1/2" and 4".
Mounting: Lower Mount (Bottom), Back Mount, Back Mount with Flange, Back Mount with U-Bracket.
Pressure Ranges: Vacuum, Compound, 0-1000 bar with NO reading on dial.
Bezel Type: Standard Crimped Bezel, or Optional Bayonet Ring.
Contacts: Normally Open (NO) or Normally Closed (NC) on Fixed Set Pressure.

EEPG-40, Center Back  Mount, Brass

EEPG-40, Center Back Mount, Brass

EEPG-40, Center Back Mount, Brass

> View E-Catalog Online Page 1                                 > View E-Catalog Online Page 2
> E-Catalog Downloading                                            > Product Gallery

Stainless Steel 316 Ti Stem for long-lasting life span to be exposed under extreme conditions.		Important components make the accuracy accurate.